10-Port Managed Switch 2x 10GbE RJ45/SFP+ 8x 1G/2.5G RJ45 Desktop

8 port 2.5Gbps, 2 port 10Gbps SFP+/ NBASE-T Combo, web managed switch The QSW-M2108-2C is a Layer 2 Web Managed Switch with two 10GbE SFP+/RJ45 combo ports and eight 2.5 Gigabit ports. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M2108-2C offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution that is usable even by non-IT professionals. The QSW-M2108-2C is compatible with 10GbE and NBASE-T technologies, supporting up to five speeds (10G / 5G / 2.5G / 1G / 100M) to provide higher transmission speeds with existing Cat 5e and 6a cables. With high performance, user-friendly management, and desktop form factor, the QSW-M2108-2C enables cost-effective upgrading to 2.5GbE or 10GbE networking while optimizing bandwidth and ensuring secure network maintenance. Flexible deployment with multiple 10G SFP+ fiber and Gigabit ports The QSW-M2108-2C provides two 10GbE SFP+/RJ45 combo ports and eight 2.5 Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T™ devices through RJ45 Category 6 (or better) cabling. The switching capacity of the QSW-M2108-2C is 80Gbps, guaranteeing the full potential of each port. Note: 10GbE SFP+ ports are backward compatible with 1GbE SFP; the RJ45 (copper) combo port supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). Flexible deployment combo ports and 10GbE / NBASE-T The QSW-M2108-2C is compatible with 10GbE and NBASE-T technologies to support five speeds (10G / 5G / 2.5G / 1G / 100M) using existing Cat 5e and Cat 6a cables. The SFP+/RJ45 (copper) combo ports provide higher transmission speeds with existing cables. Depending on cable type and lengths, different speeds can be achieved for faster, more efficient data transfer. Note: If the distance between the switch and the device is less than 45 meters (148 feet), a Cat 6 cable can be used to achieve 10Gb/s speeds. QSS: Intuitive Network Management Software The QNAP Switch System (QSS) features an easy-to-use Web GUI with value-added functions to simplify network set up and management. Sleek Design Use the at-a-glance major functions, flat control layers and one-click login to simplify set up and management. GUI The visual illustration matches physical ports for greater usability. Value-added With the settings guide, status chart reference, online firmware update, learning and management costs are greatly reduced. Optimize Network Performance with bandwidth and packet control The QSW-M2108-2C provides bandwidth and packet control functions (such as LACP, VLAN, QoS, and IGMP Snooping) to boost network performance through IP grouping and bandwidth management. LACP : Link Aggregation (LAG) combines multiple network connections to increase throughput and protect against connection failure. VLAN : Virtual Networks (VLAN) allows groups of devices from different networks to be combined into a single network. QoS : QoS (Quality of Service) helps prioritize bandwidth usage to optimize network resource allocation. IGMP Snooping : IGMP snooping assists in minimizing bandwidth loss and preventing network information leakage. Powerful security and system functions The QSW-M2108-2C has powerful security and system functions (including ACL, LLDP, RSTP and Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention and avoiding packet loss. Management Type Web Managed Number of Ports 10 10GbE SFP+/RJ45 Combo Ports 2 Management Port 8 Power Supply Description Adapter Max. Power Consumption 12.17W Input Power Type AC Input Voltage Range 100 ? 240VAC, 50/60Hz MAC Address Table 16K Total Non-Blocking Throughput 80Gbps Switching Capacity 160Gbps Management Interface Web Console RJ45 Energy Efficient Ethernet (IEEE 802.3az complaint) Fan PWM double ball bearing fan x 1 Supported Standards IEEE 802.3 Ethernet IEEE 802.3u 100BASE-T IEEE 802.3ab 1000BASE-T IEEE 802.3bz 2.5G/5GBase-T IEEE 802.3an 10G BASE-T IEEE 802.3z 1000BASE-SX/LX IEEE 802.3ae 10G Fiber IEEE 802.3x Full-Duplex Flow Control IEEE 802.1Q VLAN Tagging IEEE 802.1w RSTP IEEE 802.3ad LACP IEEE 802.1AB LLDP IEEE 802.3az Energy Efficient Ethernet (IEEE 802.1p Class of Service) Form Factor Desktop LED Indicators Per Port: Speed/Link/Activity Per System: Power/Status Buttons Reset button Dimensions (HxWxD) 42.5 x 290 x 127 mm Weight (Net) 1.12 kg Weight (Gross) 1.54 kg Operating Temperature 0°C to 40°C (32°F to 104°F) Relative Humidity 5%–95% (non-condensing) Certifications CE, FCC, VCCI, BSMI Electromagnetic Compliance CLASS A Jumbo Frames 9K Warranty 2 Years Management Type Web Managed Number of Ports 10 10GbE SFP+/RJ45 Combo Ports 2 Management Port 8 Power Supply Description Adapter Max. Power Consumption 12.17W Input Power Type AC Input Voltage Range 100 ? 240VAC, 50/60Hz MAC Address Table 16K Total Non-Blocking Throughput 80Gbps Switching Capacity 160Gbps Management Interface Web Console RJ45 Energy Efficient Ethernet (IEEE 802.3az complaint) Fan PWM double ball bearing fan x 1 Supported Standards IEEE 802.3 Ethernet IEEE 802.3u 100BASE-T IEEE 802.3ab 1000BASE-T IEEE 802.3bz 2.5G/5GBase-T IEEE 802.3an 10G BASE-T IEEE 802.3z 1000BASE-SX/LX IEEE 802.3ae 10G Fiber IEEE 802.3x Full-Duplex Flow Control IEEE 802.1Q VLAN Tagging IEEE 802.1w RSTP IEEE 802.3ad LACP IEEE 802.1AB LLDP IEEE 802.3az Energy Efficient Ethernet (IEEE 802.1p Class of Service) Form Factor Desktop LED Indicators Per Port: Speed/Link/Activity Per System: Power/Status Buttons Reset button Dimensions (HxWxD) 42.5 x 290 x 127 mm Weight (Net) 1.12 kg Weight (Gross) 1.54 kg Operating Temperature 0?C to 40°C (32°F to 104°F) Relative Humidity 5%–95% (non-condensing) Certifications CE, FCC, VCCI, BSMI Electromagnetic Compliance CLASS A Jumbo Frames 9K Warranty 2 Years