Skip to content

SEAGATE IRONWOLF NAS PRO INTERNAL 3.5" SATA DRIVE, 10TB, 6GB/S, 7200RPM, 5YR WTY

$631.25 Excluding GST
$725.94 Including GST
Availability:
Only 3 left!

SEAGATE IRONWOLF NAS PRO INTERNAL 3.5" SATA DRIVE, 10TB, 6GB/S, 7200RPM, 5YR WTY

Seagate IronWolf 10TB NAS Internal HDDDesigned for use in 1-8 bay NAS environments within home, SOHO, and SMB environments, the 10TB IronWolf 7200 rpm SATA III 3.5" Internal NAS HDD (CMR) from Seagate is built to withstand 24x7 operations, or 8760 hours per year. This 10TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, air drive design, and a 256MB cache, providing users with an ample storage capacity and data transfer speeds of up to 210 MB/s. This IronWolf hard drive also has an MTBF rating of 1 million hours, 600,000 load/unload cycles, 1 in 1015 non-recoverable read errors per bits read, and a workload rate of up to 180TB per year.Optimized for NAS with AgileArrayAgileArray is built for dual-plane balancing and RAID optimization in multi-bay environments with advanced power managementIronWolf Health ManagementIronWolf Health Management focuses on prevention, intervention, and recoveryReduced Lag TimesImproved performance means reduced lag times or downtime for users during high traffic time for the NASRotational Vibration (RV) SensorsIronWolf comes standard with RV sensors to maintain high performance in multi-bay NAS enclosuresMulti-User EnvironmentsIronWolf provides a workload rate of 180TB per year, which means that multiple users can upload and download data to the NAS server, knowing that IronWolf can handle the workload, whether you are a creative professional or small businessDesigned for Always-On, Always-Accessible 24/7 PerformanceAccess data on your NAS virtually any time, whether remotely or on siteCache MemoryIronWolf provides 256MB of cache memory, allowing your NAS to serve data faster1.0 Million Hours MTBF | Limited 3-Year WarrantyThis represents an improved total cost of ownership (TCO) over desktop drives with reduced maintenance costsDesigned for 24x7 PerformanceAccess your data on your NAS at virtually any time, whether remotely or on siteBest-Fit Applications1-8 bay business network attached storage (NAS)SpecificationsFormatted (512 bytes/sector)#10TBHeads10Discs5Bytes per logical sector512Bytes per physical sector4096Recording density, KBPI (Kb/in max)2499Track density, KTPI (ktracks/in, 0 skew)487Areal density, (Gb/in2, @ 0 skew mid-disk)1215Spindle speed (RPM)7200Internal data transfer rate (Mb/s max)2169Sustained data transfer rate OD (MiB/s max)200 (210MB/s max)I/O data-transfer rate (MB/s max)600ATA data-transfer modes supported- PIO modes 0-4- Multiword DMA modes 0-2- Ultra DMA modes 0-6Cache buffer256MB (262,144KB)Weight (maximum)720g (1.587 lb)Average latency4.16msPower-on to ready (sec) (typ/max)23/30Standby to ready (sec) (typ/max)23/30Startup current (typical) 12V (peak)1.8AVoltage tolerance (including noise)- 5V ±5%- 12V ±10%Operating ambient temperature (min °C)0°C (Ambient)Operating temperature (max °C)65°C (Drive Reported Temperature) †Non-Operating temperature-40° to 70°C (Ambient Temperature, see sections 2.6.1 and 2.10)Temperature gradient (°C per hour max)- 20°C (operating)- 20°C (nonoperating)Relative humidity- 5% to 95% (operating)- 5% to 95% (nonoperating)Relative humidity gradient20% per hour maxAltitude, operating - -304.8 m to 3,048 m- (-1000 ft to 10,000+ ft)Altitude, nonoperating (below mean sea level, max)- -304.8 m to 12,192 m- (-1000 ft to 40,000+ ft)Operational Shock (max at 2 ms - typical)Read 70 Gs / Write 40 GsNon-Operational Shock (max at 2 ms - typical)300 GsLinear Random Operating Vibration10-500 Hz: 1.04GrmsRandom Rotary Operating Vibration20-1500Hz: 12.5 rads/s²Linear Random Non-Operating Vibration10-500 Hz: 2.0 Grms refIdle- 2.8 (typical)- 3.0 (max)- During periods of drive idle, some offline activity may occur according to theSMART specification, which may increase acoustic and power to operational levelsPerformance seek 3.2 (typical)3.4 (max)Nonrecoverable read errors1 sector per 10 bits readAnnualized Failure Rate (AFR)0.87% based on 8760 POHMaximum Rated Workload- Maximum rate of <180TB/year- Workloads exceeding the annualized rate may degrade the drive MTBF and impact productreliability. The Annualized Workload Rate is in units of TB per year, or TB per 8760 power onhours. Workload Rate = TB transferred * (8760 / recorded power on hours).Load-unload cycles (command controlled)600,000Supports Hotplug operation per Serial ATA Revision 3.3 specificationYes

SHIPPING INFORMATION

Shipping

Shipping costs should be calculated at time of purchase. If you are placing a large order or an order of a larger item, please contact IT Hub using the online form as shipping costs may require amendment. In the case where shipping costs are in excess due to the nature of the order placed, you may be contacted by a representative of IT Hub to arrange an alternative shipment method.

International Orders

We currently only accept orders from within New Zealand.

Drop shipping

This Website utilises drop shipping where available, processing orders direct to you from vendors. Product tracking information may not be immediately available for all products listed. 

Order Pick up

IT Hub is an online store only and does not currently provide local pickup options.

RETURNS & WARRANTY

Return Policy

We want you to be completely satisfied with your purchase from IT Hub. If you are not satisfied, you may return the product within 7 days from the date of purchase, subject to the following conditions:

a. The product must be returned in its original condition, unopened, and with all original packaging, accessories, and documentation.

b. The Customer must obtain a Return Merchandise Authorization (RMA) number from IT Hub before returning the product.

c. The Customer is responsible for all shipping costs associated with the return, unless the return is due to an error on our part or a defective product.

d. Refunds will be issued in the original form of payment or via direct transfer.

Restocking Fee

A restocking fee of 20% will be applied to all returned products, except in cases where the return is due to an error on our part or a defective product.

Non-Return of Opened Software

Opened software cannot be returned or refunded unless it is found to be defective. In case of defective software, please contact our customer support to initiate the return process. Software compatibility is the responsibility of the Customer and is not deemed a cause of defective software.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare